Big Star Maintenance
Zoran
https://bigstarmaintenance.com.au
www.Acreagemowingmelbourne.com.au
www.facebook.com/BigStarLawnMowing
My Honda self propelled cable died today during mowing a lawn.
The handle bar just hangs there flapping in the wind. The cable looks like its still connected??? i can push the control arm up and down ( where the cable goes into the gearbox).
Any ideas?
Is the cable just snapped?
Is it hard to repair?
Everything looks good with a haircut.... ɐuıɥɔ ɯoɹɟ pɹɐoqʎǝʞ ɐ ʎnq ı ǝɯıʇ ʇsɐl ǝɥʇ sʇɐɥʇ
Big Star Maintenance
Zoran
https://bigstarmaintenance.com.au
www.Acreagemowingmelbourne.com.au
www.facebook.com/BigStarLawnMowing
Nope... The cable was adjusted a few weeks ago. Its all tight there.
I think it must have snapped off inside.
The linkage where the it goes into the gearbox can be moved up and down.
On my other Honda. the cable is ok and the linkage cannot be moved because the cable is attached.
Does anyone know if this is a big job to attach a new cable?
Ill take some pics today.
Everything looks good with a haircut.... ɐuıɥɔ ɯoɹɟ pɹɐoqʎǝʞ ɐ ʎnq ı ǝɯıʇ ʇsɐl ǝɥʇ sʇɐɥʇ
Problem fixed.
Everything looks good with a haircut.... ɐuıɥɔ ɯoɹɟ pɹɐoqʎǝʞ ɐ ʎnq ı ǝɯıʇ ʇsɐl ǝɥʇ sʇɐɥʇ
DOes the roto-blade stop increase the revs on the Honda 216?
Is it me...
Everything looks good with a haircut.... ɐuıɥɔ ɯoɹɟ pɹɐoqʎǝʞ ɐ ʎnq ı ǝɯıʇ ʇsɐl ǝɥʇ sʇɐɥʇ
Does anyone know the valve clearance for the HRU 216?
Everything looks good with a haircut.... ɐuıɥɔ ɯoɹɟ pɹɐoqʎǝʞ ɐ ʎnq ı ǝɯıʇ ʇsɐl ǝɥʇ sʇɐɥʇ
http://outdoorpowerinfo.com/engine_s...valve_gaps.asp
intake 0.15 mm
exhaust 0.20 mm
....Nothing like a good whipper....
For the life of me I don't understand why you blokes keep buying "B" grade mowers from Honda Australia when Honda USA are so much better specified and value for money.
READ THE THREAD !!!! --- http://www.indmowing.com.au/forum/sh...-an-Aussie-HRU
"Can't" is a dirty 4 letter word.
If someone says "Can't" , take the "T" off the end and brew it.
Sip on a mugfull, relax, and take a look at what you've got left to work with.
Thanks Simo. 1414141414
Everything looks good with a haircut.... ɐuıɥɔ ɯoɹɟ pɹɐoqʎǝʞ ɐ ʎnq ı ǝɯıʇ ʇsɐl ǝɥʇ sʇɐɥʇ
Hey Arfa. Ive been meaning to ask. How are the USA mowers going?
Everything looks good with a haircut.... ɐuıɥɔ ɯoɹɟ pɹɐoqʎǝʞ ɐ ʎnq ı ǝɯıʇ ʇsɐl ǝɥʇ sʇɐɥʇ
"Can't" is a dirty 4 letter word.
If someone says "Can't" , take the "T" off the end and brew it.
Sip on a mugfull, relax, and take a look at what you've got left to work with.
Today, the lower handlebar snapped in half.... theres allot of pressure on them where they are bolted onto the deck...
I welded the arm back on and a few lawns later.... snapped again.
Trying to find the part??? ive got bucklys.... its the older version 216.
Everyone has the new version...
not even on evilbay.....anyone like to sell one?
Everything looks good with a haircut.... ɐuıɥɔ ɯoɹɟ pɹɐoqʎǝʞ ɐ ʎnq ı ǝɯıʇ ʇsɐl ǝɥʇ sʇɐɥʇ
Cant you sleeve it with something?...grind off the gal/chrome/cadmium plating and just put in a pipe sleeve and re-weld it.