Independent LawnMowing Contractors Of Australia Forum
Results 1 to 6 of 6

Thread: Best place to get a 300mm replacement Zulbat blade?

  1. #1
    Member Treecat's Avatar
    Join Date
    Jan 2012
    Posts
    71

    Default Best place to get a 300mm replacement Zulbat blade?

    Melbourne. closer to the eastern suburbs the better. may also get a file and try and resurrect my old blade when im bored.

  2. #2
    Senior Member PaulG's Avatar
    Join Date
    Mar 2010
    Posts
    4,991

    Default Re: Best place to get a 300mm replacement Zulbat blade?


  3. #3
    Member
    Join Date
    May 2013
    Location
    Australia Wide
    Posts
    33

    Default Re: Best place to get a 300mm replacement Zulbat blade?

    Thank you Treecat for your enquiry. We have a number for stockists in Melbourne. Treegear - Braeside, Cannings - Mt Waverley and Karalee - Bayswater. You can also order online from our website www.arborlab.com.au or give us a call on 1300 368 170. The file is called a Feather File 999-99.
    FYI these are the sharpenable saws and the others have the tips of their teeth hardened which makes the sharpness last 5 times longer.
    Sugoi, Sugowaza, Kamisorime, Ibuki, Gomtaro, Natanoko, Yamabico, Katanaboy, Todoku, Hayauchi, and Hayate.
    Once again thank you for your enquiry and hope this helps.

  4. #4
    Member Treecat's Avatar
    Join Date
    Jan 2012
    Posts
    71

    Default Re: Best place to get a 300mm replacement Zulbat blade?

    Got one from treegrear

    So no point sharpening a Zubat? will only be using it as a "hack" saw to keep the new blade in better condition.

  5. #5
    Member
    Join Date
    May 2013
    Location
    Australia Wide
    Posts
    33

    Default Re: Best place to get a 300mm replacement Zulbat blade?

    Great that you were able to purchase your blade from Treegear!

  6. #6
    Member
    Join Date
    May 2013
    Location
    Australia Wide
    Posts
    33

    Default Re: Best place to get a 300mm replacement Zulbat blade?

    You are right about not sharpening the zubat, if someone was to try it would most probably snap the teeth off or tear into the file.

    Any other questions please shoot them through.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •