Independent LawnMowing Contractors Of Australia Forum
Results 1 to 6 of 6

Thread: what size poly

  1. #1
    Member bulldogs195461's Avatar
    Join Date
    Jan 2011
    Location
    Toowoomba Queensland
    Posts
    151

    Default what size poly

    im putting in ten roses,off a tap that has good pressure,to each rose ill just run a dripper,am i better with 13 or 19 ml poly.its about 15 meters long
    cheers john

  2. #2
    MEMBER Fred's mowing's Avatar
    Join Date
    Oct 2008
    Location
    bayside melb
    Posts
    3,223

    Default Re: what size poly

    Quote Originally Posted by bulldogs195461 View Post
    im putting in ten roses,off a tap that has good pressure,to each rose ill just run a dripper,am i better with 13 or 19 ml poly.its about 15 meters long
    cheers john
    19mm has better flow but 13mm may be a little more conv to install.
    From what you're proposing it won't make much diff.
    Cheers Fred.

  3. #3
    Member bulldogs195461's Avatar
    Join Date
    Jan 2011
    Location
    Toowoomba Queensland
    Posts
    151

    Default Re: what size poly

    ok,thanks,for that.

  4. #4
    Member brodie's Avatar
    Join Date
    Jul 2012
    Location
    Picton NSW
    Posts
    189

    Default Re: what size poly

    As said doesn't matter much on size for this application.

    I'd run 13mm that way no reducing joiners so you can save a few dollars there

  5. #5
    Senior Member PaulG's Avatar
    Join Date
    Mar 2010
    Posts
    4,991

    Default Re: what size poly

    John if you need any bits and pieces head out to Downs Water Warehouse in Carroll St behind the airport and ask for Russell. He's my cousin. Not always there though as he often on site drawing up irrigation designs and installs.

    http://www.downswater.com.au/

  6. #6
    Member bulldogs195461's Avatar
    Join Date
    Jan 2011
    Location
    Toowoomba Queensland
    Posts
    151

    Default Re: what size poly

    Thanks Paul, shall do, ta

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •