Hi Garry. My clutch lever is much the same as the old one except it is plastic. It sits roughly in the same place.
The old cable with the spring at the end fit straight on & the outer casing sat in the retainer same as the old one did. Had to take the bash plate off again to allow some movement in the gearbox to give me room to get the spring onto the lever, but other than that no problems.
I don't think I'd get a photo of the cable attachment now as it's under the pulley & tucked away in the corner. Here's a pic I took before fitting. Top arrow points to the outer cable retainer & bottom arrow is the hole that the cable spring fits into.
IMG_20190702_134226 (2)_LIrs.jpg