Independent LawnMowing Contractors Of Australia Forum
Results 1 to 6 of 6

Thread: Toro zmaster 2000 problem

  1. #1
    Junior Member
    Join Date
    Jan 2006
    Location
    Newcastle
    Posts
    21

    Default Toro zmaster 2000 problem

    Hi guys
    Iv got a toro zmaster 2000 new one iv tryed to cut my buffalo at home and it will not go lower enough to take much off all
    At the lowest setting do any one have one that can help i have to take the pin out on all the jobs that i do any help would be great
    Is it set up wrong our is that it

  2. #2
    Senior Member Mow And Go's Avatar
    Join Date
    Apr 2013
    Location
    Revesby NSW
    Posts
    969

    Default Re: Toro zmaster 2000 problem

    That's pretty much it mate. You could use spacers/washers and a longer bolt to lower the blade but I do not recommend doing that.
    I dont break things ...I just use them beyond their operational limitations
    www.mowandgogardening.com.au

  3. #3
    Senior Member edbeek's Avatar
    Join Date
    Nov 2010
    Location
    South Burnett, Qld
    Posts
    1,874

    Default Re: Toro zmaster 2000 problem

    Specs say it should go down to 1.5". I don't know that machine, but do you have any adjustment left in the deck levellers?
    The front chains should have some sort of adjuster and the rear hangers too. You might be able to let the deck down a bit on them.
    When you've finished, you'll have to park on a flat surface and measure to ensure it is level side-to-side, and pitched properly front-to-back.

  4. #4
    Member Macka's Avatar
    Join Date
    Jul 2014
    Location
    SA
    Posts
    534

    Default Re: Toro zmaster 2000 problem

    Let your tyres down

  5. #5

    Default Re: Toro zmaster 2000 problem

    Quote Originally Posted by Mow And Go View Post
    That's pretty much it mate. You could use spacers/washers and a longer bolt to lower the blade but I do not recommend doing that.
    I think there has been another thread on that somewhere!

  6. #6
    Senior Member Mow And Go's Avatar
    Join Date
    Apr 2013
    Location
    Revesby NSW
    Posts
    969

    Default Re: Toro zmaster 2000 problem

    There'd be a few id reckon, but as I said I don't recommend it lol I've never had anyone complain with me cutting at 1.5 inches personally
    I dont break things ...I just use them beyond their operational limitations
    www.mowandgogardening.com.au

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •