This has got me stumped. Rover ProCut 21"
I mowed this couch lawn during the week with freshly sharpened blades, and this was the result.
It wasn't overly long, and it mowed quite easily.
Then this morning, I got the mower on the bench and measured everything and everything seemed ok. A couple of the blades were slightly bent up, so I put on a complete set of new blades, and mowed my front kikuyu lawn, with similar results as before.
I re-mowed it at 90 degrees and got another full catcher of clippings off it (prob 80sq metres), and it looks a lot better,
I've rechecked the measurements again. The deck is level to the bench side to side, and the disc is turning true in relation to the deck.
The Rover has the adjustment to alter the front/back height for mulching/catching, and the front was 5mm lower than the back.
The machine is almost new and no slop in the height adjusting linkages or bushes.
I've always thought that it wasn't revving high enough, but it seems to be mowing easily. Can't see any adjustments on the carby, and cant see the governor for any adjustments unless I take all the cowlings etc off.
Any ideas??
sorry about the lack of thumbnails, but I can't see the 'manage attachments' tab anywhere.