Honda HRU195

Mulching Plug: $POA

Click Image for Illustration

The mulching plug is designed to enable the mower to mulch.  As shown above the rear flap (discharge guard) is lifted (same way as when you fit the catcher) and the mulching/ discharge plug is inserted.

Tip: For best results when using this attachment, always cut anti-clockwise.

Side Discharge/Grass-Deflector Chute: $35.00 

(see illustration on this page)

Heavy Duty Steel Wheel

Special Price: ONLY $15.95

8” Steel centre Wheel

Heavy Duty wheel for 19” & 21” cut buffalo models.  Nothing but good feedback on this product.

Other Honda Wheels Incl:

8” Grey plastic wheel: $15.90

8” White plastic wheel: $12.50

7” Plastic centre wheel (suits Honda HRU173): $10.00

Catcher Repair Kits: $45.00

Common Spare Parts For Honda HRU195

Honda Blades: $3.90 a Set OR $20.00 for 10 sets ($2.00 a set)  

Nut and Bolt Set: $3.40 OR $12.50 for 5 sets ($2.50 a Set)

Spark Plug BP5ES: $3.25

Handle Knob & Bolt - Honda

Plastic Handle Knob $2.10 each Handle Bolt $0.95 each

Front Axle Repair Kit: $10.25

Throttle Cable Suit Honda 19” $16.50

Air Filter: $7.50

Pre-Filter: $2.10 or 10 for $16 ($1.60 each)

HONDA HRU215

(Self-Propelled)

Mulching Plug: $POA

Enables the Honda Self-Propelled Model to Mulch.  See Details Under HRU195 Mulching Plug.

ROVER

Grass Deflectors:

Ref No. M1261 - Fits 18” cut Rover Steel deck models $35.00

Ref No. M1262 Fits 18” cut Rover Alloy deck Models $35.00

Catcher Repair Kits:

Ref No. M1270 Repair Plate fits 18” cut Rover models with split tab type catcher. $33.00

Ref No. M1271 Repair Plate fits 19 & 20” cut rover models using catcher with “X” marks on the base.  Also suits 20” cut Rover models with split tab type catcher.  Will not fit rib type catcher base. $33.00

Rover Blades:

Ref No. MS492 Flat & Fluted blade suitable for 18” cut rear catcher Rover models, also 20”

cut self propelled $2.10 or $13 for 10 sets ($1.30 a set)

Ref No MS495 Flat & fluted heavy duty blade with offset hole suitable for late model 18” cut Rover domestic rear catcher models, also 20” cut self propelled. $25.00 for 10 sets ($2.50 a set)

SIDE DISCHARGE/GRASS DEFLECTORS

Converts a rear-bag mower to side-discharge using a 90° elbow mounted on the back of the mower.

Rear Flap is lifted and chute is clipped on. Below: Illustration of Side Discharge on Honda 19”

 Catcher Repair Kits

If the lip of your catcher is broken/worn, this metal Catcher repair plate can be used.  Above, is an illustration.  We have outlined the plate in the 2^nd image for better illustration.  They are unfortunately not very photogenic.

COMMON PARTS FOR COMMON BRANDS RIDE-ON MOWERS

Walker

AIR FILTERS

MODEL C

Replaces Kohler

24 083 03

§     Fits Models Kohler CH18, CH25 and CV25

§     5 1/2" ID x 7" OD x 2 5/16" HT

Our Part No. MA212 $8.00

 Pre Filter for Above: $3.00

MODEL T

Replaces Kohler 47 083 03

§     Fits Models K241 thru K361, CH 18, 20, 22 and CV16

§     For 10, 12, 14, 16, 18, 20 and 22 HP Engines

§     5 9/16" ID x 7" OD x 2 7/16" HT

Our Part No.  MA112: $10.10

 Pre Filter for Above: $4.00

 BLADES 

ARIENS

BLADES

Replaces Part 3027759

Requires 3 for 42” cut

Order No. MB118: $25.00 each

Replaces Part 03123759

Requires 3 for 48” cut

Order No. MB120: $24.35

Replaces Part 35355/03535551

Requires 2 for 38” cut

Order No. MB139: $33.50

Replaces Part 36247

Requires 2 for 40” cut

Order No. MB109: $26.50

Replaces Part 3514/25325

Fits 30” cut Models

Order No. MB122: $42.00

Replaces Part 27286

Fits 32” cut Models

Order No.MB123: $40.00

Replaces 527011

Air Lift for 30” cut Ariens blade.

Order No. MB121: $14.50

Mower Seats

Low Back: Rover A005271

Also fits Ariens, Bolens, Gilson, MTD, Murray, Roper, Snapper, Toro & many other applications.

Spring mount – centre plate with ½”-13 Weldnut.

6” H x 14 ½” D x 16 ¾” W

Order No. M1191: $84.30

MEDIUM BACK: Suits Many ride-on and tractor Applications.

8 7/8” H x 15 5/8” D x 19” W

Order No. M1192: $100.00

HIGH BACK: Suits many ride-ons.  One hole bolt patter ½” –13 and 12 hole pattern 5/16”-18 clinch mounting nuts.

18” W x 14 ¾” D x 13 ¼” H

Includes universal mounting bracket & hardware.  Heavily padded seat back provides maximum support for the lumbar area of contractors back.

Order No. M1193: $207.00

!! Seat Covers Also Available !!

Beat the Heat, Cover the Seat